K-MAN Solutions

Menu
Menu
Chemical Protective Gloves with Cut Resistance-114.9015

Chemical Protective Gloves with Cut Resistance-114.9015

Chemical Protective Gloves with Cut Resistance
Bonded with 360⁰ Anti-Cut Typhoon® Liner

 

• Nitrile offering liquid-proof barrier and protection against a wide range of chemicals and high abrasion-resistant durability.
• EN 374:2016/Type A high chemical resistance. The Nitrile coating offers ≥ 480 minutes of permeation time for n-Heptane found in oil-based muds.
• High visibility green for maximum safety.
• Tested according to EN 388:2016 (mechanical and impact protection) and EN 374:2016 (chemical protection).
• Heat resistant up to 100°C for 15 seconds.

 

Suitable for:

Oil & Gas: Upstream, Transportation, Downstream and Clean Up | Sewage/Draining Facilities | Water Treatment Facilities.

ADD TO PRODUCT ENQUIRY

Chemical Protective Gloves with Cut Resistance-114.9015

Bonded with 360⁰ Anti-Cut Typhoon® Liner

  • Chemical resistant gloves for use against hydrocarbons including petroleum derivatives.
  • EN 388 cut protection 360 . Do not use with corrosive products.
  • This glove is particularly recommended to be used to work on drill floors (related to rigs) when in contact with oil mud and other lubricants and chemicals.

 

Storage/Transport:

  • The gloves are first packed in plastic bags which are subsequently packed in cardboard boxes for transport and storage.
  • Granberg recommends storing unused gloves in original packaging. Prevent direct sunlight.

 

Maintenance/Cleaning:

  • Both new and used gloves should be inspected before use, and before putting them on to make sure that there is no damage to them.
  • If in doubt, discard the gloves and select a new pair. Leaving the gloves in a contaminated condition may cause a deterioration of quality.
  • Cleaning or disinfecting the gloves may also negatively affect quality.
  • The performance characteristics of gloves that have been worn or cleaned/disinfected/laundered may differ from the performance levels declared. Gloves can only be cleaned with damp cloth, but it will not stop permeation processes.

 

Obsolescence:

  • Service life depends on application and maintenance and cannot be specified.
  • It is the responsibility of the user to ascertain the suitability of the gloves for the user’s task or tasks.

Please note:

  • The gloves shall not be worn when there is a risk of entanglement with moving parts of machines.
  • Gloves meeting the requirement for resistance to puncture may not be suitable for protection against sharply pointed objects such as hypodermic needles.
  • None of the raw materials used in glove, or process of manufacturing it, are known to be harmful to the user. Do not expose to open flame.
  • If the gloves become wet, do not use them to handle hot objects.
  • For multi-layer gloves, performance level are applicable to the whole glove including all layers.
  • These gloves are intended to protect hands in working environment in accordance with EN 388:2016+A1:2018, ANSI/ISEA 105-2016, EN ISO 374-1:2016+A1:2018/Type A, EN ISO 374-5:2016,, EN 407:2004 and EN 420:2003+A1:2009.
  • It is the responsibility of the user to evaluate and determine risks based on the intended application.
  • The gloves should only be used for applications declared suitable by the manufacturer.
  • Risk should be evaluated keeping in mind the protection levels and the harmonised standards on which gloves are tested.
ADD TO PRODUCT ENQUIRY